Stove Installation in Horwich
HETAS registered stove installation in Horwich — the old town, the Loco Works estates and Lostock, right under Winter Hill and Rivington.
Stoves for Horwich homes
Horwich runs from the Victorian terraces along Lee Lane and Chorley New Road, through the large estates built on and around the old Loco Works, out to Lostock and Middlebrook. Nearly every older property has a chimney breast; a good number of the newer houses do not.
Under the moor
Sitting directly below Winter Hill and Rivington, Horwich is more exposed and windier than the Bolton valley floor. Flues need proper insulation and the right terminal so the draught stays consistent when the wind gets up off the moor. Seasoned hardwood is easy to come by locally.
What we do in Horwich
- Opening up and lining boarded-over chimneys in the terraces around the old town.
- Twin-wall flue systems for the Loco Works and Middlebrook-era houses with no chimney.
- Wood burning and multi-fuel stove installation, HETAS certified and council-notified.
- Also covering Blackrod, Lostock and the Rivington side.
Frequently asked
Is Horwich a Smoke Control Area?
The built-up part of Horwich sits within Bolton's Smoke Control Area, so a DEFRA-exempt stove and authorised fuel are the norm. You are minutes from open moorland at Rivington and Georges Lane, and the higher fringes are largely outside it. We check your street against Bolton Council's map at survey.
Do I need a HETAS registered installer to fit a wood burning stove?
You don't have to, but it is the simplest way to stay legal. A HETAS registered installer self-certifies that the stove meets Building Regulations (Approved Document J) and notifies your local council. The alternative is paying Building Control to inspect the work. Tru-Heating is HETAS registered, so every installation is self-certified with an official certificate.
Can you install a wood burning stove without an existing chimney?
Yes. Where there is no masonry chimney we fit an insulated twin-wall flue system that runs internally or up an external wall, to HETAS and Building Regulations standards.
How long does a stove installation take?
A straightforward install into an existing chimney is usually one day. A new twin-wall flue system, or work that involves opening up a fireplace or building a hearth, typically takes two to three days.
Get a free fixed quote
Tell us about your project in Horwich and we’ll arrange a survey.
Request a quote