Stove Installation in Radcliffe
HETAS registered stove installation in Radcliffe — reopening and lining chimneys in the terraces, plus Ainsworth, Outwood and the estates toward Whitefield.
Chimney work for Radcliffe terraces
Radcliffe is a former cotton, coal and papermaking town on the Irwell between Bury and Bolton, and most of its housing shows it — dense Victorian terraces around Green, Blackburn Street and Coppice, inter-war semis, and newer infill. Almost all of it has a chimney, and a great many have been boarded over since central heating went in.
Getting a boarded chimney back into use
Behind the plasterboard there is usually a sound builder's opening. We open it up, check and if needed replace the lintel, sweep and camera the flue, line it, and fit the stove with the correct hearth and a carbon monoxide alarm. On a straightforward terrace it is a one-day install.
What we do in Radcliffe
- Opening up and lining boarded chimneys for wood burning and multi-fuel stoves.
- Twin-wall flue systems where there is no usable chimney.
- HETAS certified installation with Building Regulations self-certification.
- Also covering Ainsworth, Outwood, Bircle and Stoneclough.
Frequently asked
Is Radcliffe a Smoke Control Area?
Yes, Radcliffe is within Bury's Smoke Control Area, so an appliance needs to be DEFRA-exempt to burn wood, or you burn authorised smokeless fuel. We fit exempt stoves as standard and check your street at survey.
Do I need a HETAS registered installer to fit a wood burning stove?
You don't have to, but it is the simplest way to stay legal. A HETAS registered installer self-certifies that the stove meets Building Regulations (Approved Document J) and notifies your local council. The alternative is paying Building Control to inspect the work. Tru-Heating is HETAS registered, so every installation is self-certified with an official certificate.
Can you install a wood burning stove without an existing chimney?
Yes. Where there is no masonry chimney we fit an insulated twin-wall flue system that runs internally or up an external wall, to HETAS and Building Regulations standards.
How long does a stove installation take?
A straightforward install into an existing chimney is usually one day. A new twin-wall flue system, or work that involves opening up a fireplace or building a hearth, typically takes two to three days.
Get a free fixed quote
Tell us about your project in Radcliffe and we’ll arrange a survey.
Request a quote